The Smart Arming feature can be enabled for any residential customer who has an interactive monitoring plan with Alarm.com. Once enabled, the feature can easily be configured using either the customer website or iOS or Android app.

Once configured, the Smart Arming feature will automatically arm the system to the Stay Mode once the occupants of the home have gone to bed. This can be accomplished using a schedule, or by configuring certain door and/or motion sensors to work in conjunction with the feature. You can reach the Smart Arming settings by going to Security, or through the Automation page. The Smart Arming programming is listed as Goodnight for Arming, and Wake Up for Disarming.

For example, you can set the system to Arm Stay at 10:00 PM, or you can set the system to Arm Stay when no activity has been detected for 30 Minutes between 10:00 PM and 11:30 PM (this is just an example, and you can use whatever time frame you want). If you choose the latter option, you then configure which zones you want to apply this logic to.

For the Stay Arming feature, doors, windows, and motions can be used along with the feature. So, once you choose the zones to be used with this logic, if no activity has been detected on ALL of those zones for a full 30 Minutes, and the time is between 10:00 PM and 11:30 PM, the system will automatically Arm Stay. Smart Arming logic is canceled if the system is already Armed Away.

For Disarming the options are similar. You can set the system to Disarm at a specific time, or you can set it to Disarm when motion is detected on certain motion detectors within a specific time window. For example, in our screenshot below, you can see we have our system set to Disarm if the Upstairs Motion detects movement between 8:00 AM and 9:00 AM. We also have it set so that if no motion is detected, the system will still disarm at 9:00 AM, which is sort of the best of both worlds.

Notice that only Motion Detectors are now available to tie to the Disarm logic. You don't want someone opening a door to disarm the system. By the same token, be sure that no outdoor motions are configured to work with this automation.

This is an excellent new feature that can go a long way toward preventing false alarms. No more forgetting to disarm the system when you go to let the dog out in the morning. As long as you set it up so that a motion you walk past on your way to the door causes the system to Disarm, you're all set. No more laying in bed wondering if you remembered to set the alarm. Now, as long as you have configured the Goodnight options, you know your system will arm itself based on either a schedule or activity (or lack thereof) combined with a time window.

The following Alarm.com compatible panels support this feature:

What do you think of this new Alarm.com feature? For that matter, what do you think of Alarm.com's commitment to bringing you new products and features in general? They're doing an excellent job of listening to customers and responding with great new options. Drop us a note in the comments and let us know what you think. We always look forward to hearing from you!

It seems every week we're reporting a new feature being rolled out by Alarm.com. They recently added remote Duress Code programming through the Alarm.com app or website. Alarm.com must first enable this feature for the dealer, then users will have access if their panel supports the feature.

Before any Alarm.com user can start configuring codes remotely, the alarm dealer for the customer account must have this feature enabled. If the feature is not showing up when a user attempts to remotely program the Duress Code, contact the Alarm.com dealer and ask them to enable it. They may need to contact their Alarm.com Sales Representative to get the feature enabled.

Next, be sure that the alarm panel being used supports this feature. We have an FAQ on how to set up this feature via the Alarm.com Website and another FAQ on how to set up this feature using the Alarm.com App. Both of these FAQs have a list of compatible panels, and advise if a single or multiple codes are supported by the panel.

The way a Duress Code works is simple. If a system user is forced to interact with their alarm panel in any way, though this will usually involve disarming the system, if the Duress Code is used, then in addition to performing the security system function a silent signal is sent to the monitoring station alerting them to the fact that the system user is under duress. They are being forced to do something against their will. The monitoring station will receive this signal and then process it according to the customer's pre-stated wishes, and their own policies regarding duress situations.

The key element to the use of a Duress Code is the ability for someone who is not onsite to receive the signal and immediately take action. If the security system is not monitored by a trained 24/7 monitoring station employee then the Duress Code might just as well not exist. It may be possible to send a text, email, or push notification to someone outside the home or business, but there's a good chance that person may never see it, or may not understand what they're seeing. If there is any concern that a duress situation might occur, then central station monitoring is the best way to protect the people you love.

And finally, one thing I nearly forgot to mention above, an Alarm.com dealer cannot program a Duress User for a customer through their panel programming portal. Only the Admin Alarm.com Account user, the homeowner or business owner, is allowed to affect these codes remotely. So, what do you think about this new feature? Do you like the idea of being able to control system Duress Codes remotely? Leave a comment below and let us know your thoughts. We always enjoy hearing from our readers. That's all for now, stay safe out there.

If you use an Interlogix Alarm System with Alarm.com, then you can expect a firmware update for your system's LTE communicator. The firmware update will be automatic, and no action will need to be taken. Interlogix Simon Panels, NetworX Panels, and Concord4 Panels will receive the update.

If you haven't upgraded to an LTE communicator yet, then make sure to do so as soon as possible. The 3G Sunset is going to occur on January 31st, 2022 for AT&T and December 31st for Verizon. If you are not aware of the 3G sunset, then please read this blog to get acquainted. This upgrade is very important to ensure that you do not experience a loss of service.

We want to mention that each firmware update is just a general update designed to improve the user experience. Each update is being pushed down automatically, at no cost to the user. No action is needed on your end, just have your system online and connected with the Alarm.com servers, and everything will be taken care of.

Please note the update according to your Interlogix System:

• Interlogix Concord4 - Firmware Update 189d
• Interlogix NetworX - Firmware Update 189a
• Interlogix Simon XT, XTi, XTi-5, XTi-5i - Firmware Update 191f

Additionally, if you use a Honeywell VISTA System with an Alarm.com SEM (not AlarmNet or Total Connect 2.0), then you will also be getting a pair of automatic system updates. All VISTA Systems using Alarm.com SEMs will receive the SEM VISTA 187i Upgrade and the 1.61 Firmware Upgrade. Again, both updates are automatic, and they are being provided at zero cost.

That's all the news for now. If you have any of the aforementioned systems on Alarm.com, then you can expect the automatic firmware update. If you are monitored by Alarm Grid and you are having any trouble with your system, please email support@alarmgrid.com. Please keep in mind our usual business hours of 9am to 8pm ET M-F.

We're back with another video recap! This time, we only published four (4) new videos, and they were all right at the end of the week. We hope to get more videos published in the upcoming week so that we can present a more robust video recap next time. But for now, here are our new videos.

Interlogix Simon XT: Setting Installer Code to Default

I show you how to reset the Installer Code on an Interlogix Simon XT Security System back to its default of 4321. You need this code or the Dealer Code to get into panel programming. Interestingly, the Dealer Code also has the same default of 4321. If you change the Installer Code, then you will not be able to change it back to 4321 unless you change the Dealer Code, or you factory default the system. Factory defaulting the Simon XT will reset the Installer Code back to 4321, and it will also reset the Dealer Code to 4321 as long as the Phone Lock setting for the system is OFF.

Honeywell VISTA: Custom Word or Phrase on Alpha Keypad

I show you how to set a custom word or phrase for the Alphanumeric Keypad used by your Honeywell VISTA Security System. You can set a custom word or phrase of up to (16) characters by accessing the system's Alpha Programming feature and configuring the custom word for the partition that your keypad is assigned with. After you do that, all of the Alphanumeric Keypads on that system partition will display the custom word or phrase. You may decide to change the custom word or phrase for a seasonal or holiday message, and it's great for adding a personalized touch to the system.

Wired Alarm System: Resetting

I show you how to reset your wired alarm system. When someone is talking about "resetting" a security system, they mean one of two (2) things. First, they could be talking about a power cycle reset, in which the system is turned OFF and then back ON. This is useful for safely making hardware changes, and it can also be used as a general and basic troubleshooting step. The other type of reset is a factory default reset. This will restore all settings and configurations for the system back to how they were when the system was brand new and hadn't yet been programmed.

Wireless Alarm System: Resetting

I show you how to reset your wireless alarm system. Just like a hardwired security system, a wireless system can receive the same two types of reset. Again, these are a power cycle reset and a factory default reset. The one big difference for a wireless alarm panel is that you can often perform both types of resets by choosing an option within the panel's programming menus. This varies between different types of wireless security systems, and you will likely need to refer to your system's manual to learn how to perform a power cycle reset or a factory reset for that particular system.

We're here with another video recap! There are eight (8) new videos for you to check out this week. Once again, I took the role of appearing in all the videos. We hope to have some familiar faces returning soon! But for now, let's take a look at what our video team has been up to.

Deleting a Wireless Zone from a Simon XT

I show you how to delete a wireless zone from a Simon XT Security System. The Simon XT uses 319.5 MHz wireless sensors, and it has forty (40) zone slots available. By accessing the Sensors Menu of Programming, you can delete any wireless zone that has been set up with the system. You can then enroll a new sensor in that open zone slot if needed. Keep in mind that the zone must be rebuilt from scratch if you decide to re-add the sensor back to the system.

Deleting a Wireless Zone from a Simon XTi or Simon XTi-5

I show you how to delete a wireless zone from a Simon XTi or Simon XTi-5. The Simon XTi and Simon XTi-5 are essentially the same as the Simon XT, except for the fact that these two panels have built-in touchscreen keypad. Both the Simon XTi and Simon XTi-5 have forty (40) available wireless zones, and they both use 319.5 MHz wireless sensors. If you delete a zone from the Simon XTi or Simon XTi-5, then you can reuse the zone with a new sensor.

Disabling Exit Sounds on a Qolsys IQ Panel 2 or IQ Panel 2 Plus

I show you how to disable Exit Delay sounds on the Qolsys IQ Panel 2 Plus. The IQ2 makes Exit Delay sounds for false alarm prevention. The idea is that if you accidentally Arm Away the system, then the Exit Delay sounds will alert you to the situation so that you know to either leave the building or cancel the arming session. But if you find Exit Delay sounds to be bothersome or annoying, there are a couple of different options for muting these sounds.

Cover Tamper Causes the Qolsys IQ Panel 2 to Make Strange Noises

I explain why the Qolsys IQ Panel 2 will make an usual noise every thirty (30) minutes. The reason why this happens is because the panel is not positioned on its back mounting plate properly. It can be a bit tricky to get the panel on the back plate properly, but once you do, the sound should stop occurring. If you absolutely cannot get the panel positioned on the back plate, then you do have the option of disabling tamper cover notifications in programming.

Manually Extending the Exit Delay Time On IQ2

I show you how to manually extend the Exit Delay countdown time on the Qolsys IQ Panel 2 for a single arming session. When you Arm Away on the IQ2, the Exit Delay timer will go into effect. You must then leave the building or cancel the arming session within the exit delay time limit. If you press the green +60 button, then the Exit Delay will be extended by sixty (60) seconds. You can only do this once per arming session. Pressing the button again will do nothing.

Permanently Extending the Exit Delay Time On IQ2

I show you how to permanently extend the Exit Delay countdown time on the Qolsys IQ Panel 2. By permanently extending the Exit Delay, you will have a longer amount of time to vacate the building every time you Arm. The system will use either the Normal Exit Delay setting or the Long Exit Delay setting depending on what zones you have programmed with the system. If you have at least one zone with Sensor Group 12 - Entry/Exit Long Delay, then the system will use the Long Exit Delay setting.

Installing a Honeywell 7847i on a VISTA P-Series Alarm Panel

I show you how to install a Honeywell 7847i on a VISTA P-Series Security System. The Honeywell 7847i is an IP communicator that allows a compatible panel to connect with the Resideo AlarmNet Servers for monitoring service. If you want to use Total Connect 2.0 with your system, then you must be running Firmware Version 9.12 or higher on a VISTA-15P or VISTA-20P. You can determine the firmware by checking the PROM Chip. No version of the VISTA-10P will work with Total Connect 2.0.

Installing a Honeywell 7847i On a VISTA TURBO Panel

I show you how to install a Honeywell 7847i on a Honeywell VISTA TURBO Panel, such as a Honeywell VISTA-128BPT or a Honeywell VISTA-250BPT. The most common reason why someone will choose to use an IP-only communicator is because they want monitoring costs to be as low as possible. IP monitoring is less expensive than cellular monitoring because no cellular service fees are incurred. But keep in mind that an internet outage will take your panel offline if you rely strictly on IP communication for your system.

After our big return last week, we're back in a major way with 12 new videos this week! As our headquarters has only partially reopened, I had to try doing some videos again. But a familiar face has returned. We're sure you're eager to see who. Anyway, here come the new Alarm Grid videos!

Adjusting Z-Wave Device Limits On My Qolsys IQ Panel 2 Plus

I show you how to adjust the Z-Wave device limits on your Qolsys IQ Panel 2 Plus Security System. The Z-Wave device limits determine how many of each Z-Wave device type you can pair with the system. There are limits for thermostats, smart sockets, door locks, lights, garage doors, and "other" Z-Wave devices. The maximum total limit for all devices combined is 152 Z-Wave devices. You will need the Installer Code or Dealer Code (default 1111 and 2222, respectively) to change these limits. Also note that the Z-Wave device limit for Alarm.com is 122 Z-Wave devices.

Upgrading the Z-Wave Firmware for My Qolsys IQ Panel 2 Plus?

I show you how to upgrade the Z-Wave firmware for a Qolsys IQ Panel 2 Plus System. This is something you may want to do if the system is running a Z-Wave firmware of less than 6.81.03. At that Z-Wave firmware, you unlock the Smart Start feature for quickly adding Z-Wave devices, and you upgrade the system to the S2 security protocol for automation devices. Any Qolsys IQ Panel 2 manufactured with System Firmware Version 2.4.0 or higher (upgrading later doesn't count) will already have this Z-Wave Firmware Version.

Overview of the Smart Start Feature on the Qolsys IQ Panel 2 Plus

I talk about the Smart Start feature that can be used with any Qolsys IQ Panel 2 that is running Z-Wave Firmware Version 6.81.03 or higher. The Smart Start feature allows you to pair Z-Wave devices by scanning a QR code, instead of performing a traditional inclusion/exclusion process. As of June 2020, only a very limited selection of Z-Wave devices from Qolsys, Alarm.com, Eaton, and Danalock are compatible with the feature. But it can save you time if adding a large number of Z-Wave devices.

Using the Smart Start Feature on the Qolsys IQ Panel 2 Plus

I show you how to use the Smart Start feature on a Qolsys IQ Panel 2 Plus to add new Z-Wave devices. If your IQ Panel 2 is on Z-Wave Firmware Version 6.81.03 or higher and you have a compatible Z-Wave device, then you can use the Smart Start feature to add it to the Z-Wave network. Depending on the Z-Wave device, the QR code may be on the packaging or on the device itself. Some may have the code on both the packaging and the device.

How Many Z-Wave Devices are Supported on the 2GIG GC2 or GC2e?

I discuss the Z-Wave device limits for the 2GIG GC2 and the 2GIG GC2e. The classic GC2 has a standard Z-Wave controller, while the newer GC2e has an upgraded Z-Wave Plus controller. Both support the same Z-Wave devices, though Z-Wave Plus devices will get an extended range and battery life when used with the GC2e. The Z-Wave device limit for both systems is 232 Z-Wave devices, though it should be considered that adding a very large number of Z-Wave devices can diminish system performance.

How Many Z-Wave Devices are Supported on the 2GIG GC3 or GC3e?

I discuss the Z-Wave device limits for the 2GIG GC3 and 2GIG GC3e. Both of these systems have built-in Z-Wave Plus controllers for building an automation network of smart devices. Just like the "lower-end" 2GIG Systems, the GC3 and GC3e can support a maximum of 232 Z-Wave devices, though usually far fewer are actually used in practice. You should also keep in mind that Alarm.com has its own Z-Wave device limit of 122 devices. This means that only the first 122 Z-Wave devices paired with the system will get pushed over to Alarm.com.

Excluding the Kwikset Z-Wave Lock from the Lyric Controller

I show you how to exclude a Kwikset Z-Wave Lock from a Z-Wave network using a Honeywell Lyric Alarm System. Clearing the lock from the network will wipe out all of its residual Z-Wave data. This is normally done before adding the lock to the Z-Wave network, or when you need to delete it from the system. The Lyric can be used to clear the Z-Wave network data in the lock, even if the lock wasn¡¯t paired using the Lyric to begin with.

Including the Kwikset Z-Wave Lock from the Lyric Controller

I show you how to pair a Kwikset Z-Wave Lock with your Honeywell Lyric Alarm System. This will allow you to control the lock from the panel and remotely from Total Connect 2.0 if the system is monitored and set up with the service. Normally, an exclusion process is performed before the inclusion process. Most Kwikset Locks have a simple button that is used for including and excluding. Pressing this button while the system is in its inclusion mode will include the lock into the Z-Wave network.

Excluding a Schlage Z-Wave Lock with the Honeywell Lyric

I show you how to exclude a Schlage Z-Wave Lock from a Z-Wave network using the Honeywell Lyric Alarm System. Just like most other Z-Wave devices, an exclusion process is normally performed either before adding the device to the Z-Wave network, or when deleting the device from the Z-Wave hub. For a Schlage Lock, you must access the programming code that is found on a white sticker underneath the lock's main cover. You will need a screwdriver to remove this cover.

Including a Schalge Z-Wave Lock with the Honeywell Lyric

I show you how to include a Schlage Z-Wave Lock to the Lyric's Z-Wave network. A Schlage Lock will follow the same process for inclusion as it does for exclusion. However, you will normally want to exclude the lock first to wipe out any residual Z-Wave data. To include the lock, simply enter the programming code on the lock's sticker, followed by the [0] key while the Lyric System is in the appropriate Z-Wave inclusion mode.

Enrolling a Z-Wave Lock to My Qolsys IQ Panel 2

In his triumphant return, the always fantastic Jorge shows you how to enroll a Z-Wave door lock to your Qolsys IQ Panel 2 System. This is done by putting the IQ Panel 2 into its Z-Wave inclusion mode and then activating the inclusion function on the lock. For most locks, you will want to clear the lock from the network to wipe its residual Z-Wave data before completing the inclusion process. The lock can then be controlled from the panel, as well as from Alarm.com if the system is monitored with access to the service.

Resetting an Interlogix Simon XT to Factory Defaults

This is an update from a previous video shot more than a year ago. Jorge shows you how to reset an Interlogix Simon XT System back to its factory default settings. This will reset the Master Code (1234) and the Installer and Dealer Codes (both 4321), delete any added codes and system zones, and restore all settings and configurations to their default values. It is important to note that if the option for "Phone Lock" in system programming is enabled, then certain settings will not be affected by the default.

Alarm Grid has learned that Interlogix will start shutting down its business in North America by the end of 2019. The company states that it will concentrate on growth in other fire and security businesses. Interlogix says that it will follow-through on any existing warranty obligations.

This is a surprising turn of events, considering Interlogix has very recently released new equipment, including the Interlogix Simon XTi-5i Security Panel. But on the other hand, it isn't too shocking when you consider that Interlogix likely couldn't compete with some of the other big names in the security industry. This includes Qolsys, who just announced that they would begin manufacturing their IQ Panel 2 Plus System in the United States.

If you have an existing Interlogix System, do not worry. Alarm Grid will continue to provide effective and reliable monitoring for you panel. There is no reason for monitoring platforms like Alarm.com to drop support for existing communicators. You should also have no problem activating a new communicator for an Interlogix Panel. If you move into a new home and find an Interlogix Panel on the wall, there is a great chance you will be able to use it with Alarm Grid!

Anyway, we will be sad to see Interlogix go. We wish them the best in whatever endeavors they decide to take on moving forward. But there are still some outstanding security companies like Qolsys, Resideo, and Nortek that are continuing to innovate and release impressive equipment. We expect great things on the horizon for the security industry moving forward.

Hi DIYers! We are excited to announce that we now have dual-path communicators available for the Interlogix Simon Series Systems. Compatible panels include the Simon XT (1.3+), Simon XTi, Simon XTi-5 and the upcoming Simon XTi-5i System. There are AT&T LTE and Verizon LTE options available.

If you are an Interlogix Simon user, then you know how important it is to add an alarm monitoring communicator to your system. These systems don't come with an integrated communicator, and you need to add one if you want reliable alarm monitoring service and connectivity with the Alarm.com platform. By accessing Alarm.com, you can arm and disarm your system, check current system status, control Z-Wave devices, and view your ADC Cameras from virtually anywhere in the world.

What's great about these new communicators is that they utilize dual-path connectivity across an LTE network and a local IP network. In other words, you get the ultra-fast speeds of IP monitoring, plus the full reliability of cellular connectivity. If one path goes down or becomes unavailable, the other path will be there to back it up. This is ideal for situations where the internet goes down or when an electrical outage takes your router offline. Your system will still have cellular service to fall back on.

You get more than just trustworthy dual-path connectivity with one of these new communicators. They are also effective Z-Wave Plus controllers that you can use to start building a complete smart home network. You can add classic Z-Wave and Z-Wave Plus devices to the panel for use with Alarm.com. This includes the ability to start creating smart scenes for automatic operation based on a set schedule or with certain system events. We recommend using Z-Wave Plus devices for optimal battery life and wireless signal range.

It's important to note that these are LTE and IP dual-path communicators. If you aren't aware, LTE stands for "Long-Term Evolution", and cellular service providers have promised to support their LTE networks well into the very distant future. By upgrading to one of these modules, you are ensuring that your Interlogix Alarm Panel can receive fast and reliable monitoring service for many years to come.

These dual-path communicators come in AT&T LTE and Verizon LTE options. Remember, this has nothing to do with the cellular service provider for your smartphone. You can certainly have an AT&T Smartphone and use a Verizon Communicator for your alarm system, or vice-versa. You should simply choose whichever service provider works more effectively in your area. The new communicators are as follows:

• Alarm.com XT-511-US-DP-AT - AT&T LTE & IP Communicator
• Alarm.com XT-511-US-DP-VZ - Verizon LTE & IP Communicator

Remember, you will need a Self Gold Level Plan or higher from Alarm Grid to use these communicators. This is the only way to gain access to the Alarm.com platform for security and smart home control. More information about our alarm monitoring plans is available on our alarm monitoring page.

If you have any questions about these new Interlogix Dual-Path Communicators, please reach out to us. The best way to contact us is to email support@alarmgrid.com. We will check this email at our earliest convenience and reply back as soon as possible. You may also call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you.

Hi DIYers! Today, we're taking a look at the LTE cellular communicators for the Interlogix Simon XT, Simon XTi and Simon XTi-5 Alarm Systems. These cellular communicators are used for getting a new or existing Simon Security System connected with the Alarm.com interactive service.

When it comes to LTE cellular communicators for the Simon XT, XTi and XTi-5, users have three options to choose from. These are the following options:

• Interlogix 600-1048-XT-LTE-AT AT&T LTE Communicator
• Interlogix 600-1048-XT-LTE-VZ Verizon LTE Communicator
• Interlogix 600-1048-XT-LTE-TL Telus LTE Communicator (Canada Only)

The decision between AT&T, Verizon or Telus should depend on which cellular service tends to work best at the location of the system. This has nothing to do with a user's personal cellular service provider. For example, even if a user has a Verizon Phone, they can still get an AT&T communicator for their alarm system.

But regardless of which cellular network is used, there's no denying the benefits of connecting to an LTE network. LTE stands for "long-term evolution", and it represents some of the fastest and most reliable cellular networks that are being used today. Cellular service providers have promised that they will continue to support their LTE networks for many years into the distant future. So by choosing an LTE communicator, a user is essentially future-proofing their alarm system.

Adding a cellular communicator is perhaps the most important upgrade that a user can make for their Simon XT, XTi or XTi-5 System. Without a cellular communicator, these systems can only use telephone service for alarm monitoring. But this practice is almost always discouraged due to the slow communication speeds and unreliable service associated with phone line monitoring. For the Simon XT, XTi and XTi-5, cellular is almost always the way to go.

With cellular monitoring on a Simon XT, XTi or XTi-5, the user will enjoy fast and reliable communication. They will also be able to rest easy in knowing that their system will still remain monitored even when the power goes out. This can be very important for providing a user with proper peace of mind. And a cellular communicator will allow the system to connect with the Alarm.com interactive service.

A user can access the Alarm.com service at any time to arm and disarm their system, control Z-Wave smart home devices, check the current status of security sensors and more. The service can be accessed through a web browser or remotely using the Alarm.com Mobile App on iOS and Android devices. And since these cellular modules double as Z-Wave controllers, adding an LTE communicator will instantly make the Simon Systems Z-Wave ready for use with Alarm.com.

The LTE cellular communicators are compatible with all versions of the Simon XTi and Simon XTi-5 Systems. But the Simon XT System will need to be running firmware version 1.3 or higher. A user can check the current firmware version on their Simon XT by scrolling down on the main menu screen until the firmware version is displayed. It is important to keep this in mind when adding a cellular communicator to a Simon XT.

But not everyone who needs a cellular communicator necessarily has a brand-new Simon XT, XTi or XTi-5 System. A user will often purchase a cellular communicator to takeover their existing Simon Panel from a different alarm company. Many alarm companies use proprietary communicators, and they will not work with other companies. By removing the old communicator and replacing it with a new one that is unregistered, the system can be successfully taken over and used with a new monitoring company. We have already had many users do exactly this to receive alarm monitoring services from Alarm Grid, without having to replace their old Simon Panel.

The Interlogix Simon LTE Cellular Communicators are available from the Alarm Grid website right now. Get one so that you can receive top-quality cellular monitoring service for your Simon XT, XTi or XTi-5 System!

Hi DIYers! Today we are very excited to announce that Alarm Grid will now begin selling Interlogix Panels and sensors. Interlogix has offered excellent security products for decades, with their equipment previously being sold under the GE brand. By offering these tremendous panels and sensors, we are providing customers with yet another option in terms of security equipment that they can choose for their home or business.

Alarm Grid has always taken great pride in providing monitoring support for as many alarm systems as possible. However, we have been strategically selective in terms of the equipment that we offer for sale. This has allowed us to provide comprehensive and detailed support for all of the equipment that we offer. Shortly after Alarm Grid was founded in 2012, we began offering Honeywell equipment because we believed that it was the most accessible for DIY consumers. We later expanded our offerings to include 2GIG equipment and Qolsys equipment as well. Now today, Interlogix represents the fourth major equipment manufacturer to receive full support from Alarm Grid. We can now officially say that we are an Interlogix Dealer.

Customers can browse our site and check out Interlogix panels, sensors and even entire system kits. We view Interlogix Systems as a viable budget and economical option for consumers. The equipment is relatively less expensive, and the panels arrive with fewer bells and whistles than their Honeywell, 2GIG and Qolsys counterparts. However, these systems can be fully upgraded to perform virtually any action or function that is possible with other modern alarm systems. Additionally, Interlogix sensors and peripherals tend to be more affordable than those from other manufacturers. All of this makes Interlogix a fantastic choice for any customer who is looking for a complete and total security setup at a reduced cost.

Our Interlogix offerings will be based around three major alarm systems. These are the Simon XT, Simon XTi and Simon XTi-5. These are all self-contained wireless all-in-one alarm panels that provide support for up to 40 wireless zones. The Simon XT features an integrated push-button keypad and a dual-line ext-based LCD screen. The panel also features quick-access panic buttons in case of an emergency. The touchpad system is surprisingly easy to program, and it offers the full capabilities as the other Interlogix Simon Alarm Systems.

The Interlogix Simon XTi represents an upgraded version of the Simon XT. The Simon XTi provides the complete functionality of the Simon XT, but it includes an integrated 3.5 inch touchscreen controller. This makes navigating the system menus more user-friendly, and it offers a more engaging experience overall. The integrated touch screen also allows users to control any programmed Z-Wave home automation devices directly from the panel itself. Interlogix also products the Simon XTi-5. This system is exactly the same as the Simon XTi, but the Simon XTi-5 features a larger 5 inch touch screen, as opposed to the 3.5 inch touch screen found on the Simon XTi.

All of the Interlogix Simon Alarm Systems come with an integrated wireless receiver so that they can readily communicate with wireless sensors. The wireless sensors used with the Interlogix Systems communicate at a frequency of 319.5 MHz. This is the same wireless frequency used by Qolsys sensors. This means that any unencrypted Qolsys sensor (non S-Line) can interface with an Interlogix System. It is also possible to use Interlogix sensors with the Qolsys IQ Panel and IQ Panel 2 Systems. Qolsys owners can certainly turn to Interlogix sensors as a cost-effective option for upgrading their systems

Most customers who purchase an Interlogix System will want to obtain a cellular module upgrade as well. Cellular service for alarm systems is known for its lightning fast communication speeds and its exceptional performance and consistency overall. This type of communication almost never experiences any type of service disruption, and it is not affected by power outages. This outstanding performance and reliability makes cellular communication the gold standard for alarm systems. Installing a cellular module in an Interlogix System is a very quick and easy process that can be fully completed by most end users.

Interlogix offers LTE cellular communicators for all of their alarm systems. LTE is currently the fastest and most consistent form of cellular communication available, and cellular service providers have committed to supporting LTE communication for many years to come. For those reasons, we strongly encourage users to choose LTE cellular communicators for their Interlogix Systems. These LTE communicators will provide the best possible performance, and they will ensure that the user's equipment can be fully supported for monitoring well into the very distant future. Customers can choose between LTE service from Verizon, AT&T and Telus (Canada only).

As part of our Interlogix product launch, Alarm Grid will offer full support and guidance for Interlogix Systems and equipment. Users can read dozens of FAQs to help them get started with a new Interlogix System. Our team is also planning on releasing helpful how-to videos for Interlogix Systems in the near future. Additionally, any monitored customer is invited to speak with one of our helpful support technicians online or over the phone for help with using or setting up their Interlogix System. Our team has recently spent time training and learning the intricacies of these systems so that we are fully prepared to help you with any issues that you might experience.

Alarm Grid is very pleased to welcome the Interlogix brand to our growing family. We are sure that Interlogix Systems monitored by Alarm Grid will quickly find their way into homes and businesses everywhere. As always, thank you for choosing Alarm Grid, and we look forward to providing you with industry-leading support in the future.