The Smart Arming feature can be enabled for any residential customer who has an interactive monitoring plan with Alarm.com. Once enabled, the feature can easily be configured using either the customer website or iOS or Android app.

Once configured, the Smart Arming feature will automatically arm the system to the Stay Mode once the occupants of the home have gone to bed. This can be accomplished using a schedule, or by configuring certain door and/or motion sensors to work in conjunction with the feature. You can reach the Smart Arming settings by going to Security, or through the Automation page. The Smart Arming programming is listed as Goodnight for Arming, and Wake Up for Disarming.

For example, you can set the system to Arm Stay at 10:00 PM, or you can set the system to Arm Stay when no activity has been detected for 30 Minutes between 10:00 PM and 11:30 PM (this is just an example, and you can use whatever time frame you want). If you choose the latter option, you then configure which zones you want to apply this logic to.

For the Stay Arming feature, doors, windows, and motions can be used along with the feature. So, once you choose the zones to be used with this logic, if no activity has been detected on ALL of those zones for a full 30 Minutes, and the time is between 10:00 PM and 11:30 PM, the system will automatically Arm Stay. Smart Arming logic is canceled if the system is already Armed Away.

For Disarming the options are similar. You can set the system to Disarm at a specific time, or you can set it to Disarm when motion is detected on certain motion detectors within a specific time window. For example, in our screenshot below, you can see we have our system set to Disarm if the Upstairs Motion detects movement between 8:00 AM and 9:00 AM. We also have it set so that if no motion is detected, the system will still disarm at 9:00 AM, which is sort of the best of both worlds.

Notice that only Motion Detectors are now available to tie to the Disarm logic. You don't want someone opening a door to disarm the system. By the same token, be sure that no outdoor motions are configured to work with this automation.

This is an excellent new feature that can go a long way toward preventing false alarms. No more forgetting to disarm the system when you go to let the dog out in the morning. As long as you set it up so that a motion you walk past on your way to the door causes the system to Disarm, you're all set. No more laying in bed wondering if you remembered to set the alarm. Now, as long as you have configured the Goodnight options, you know your system will arm itself based on either a schedule or activity (or lack thereof) combined with a time window.

The following Alarm.com compatible panels support this feature:

What do you think of this new Alarm.com feature? For that matter, what do you think of Alarm.com's commitment to bringing you new products and features in general? They're doing an excellent job of listening to customers and responding with great new options. Drop us a note in the comments and let us know what you think. We always look forward to hearing from you!

Alarm Grid is excited to announce we are now offering certain Qolsys products at a lower price. Price reductions occur from time to time, and we're always happy to pass those savings on to our customers. The products we'll be talking about today cover a wide range of uses. Let's take a look.

The Qolsys Hardwire 16-F: This wired to wireless translator for 319.5 MHz panels sets the Gold Standard for these types of devices. With support for up to 16 wired zones, including one 2-wire smoke zone with up to ten (10) smoke detectors, 500 mA of power for devices such as motion detectors, and a 500 mA siren relay compatible with panels on RF PIC Version 11.1.4.G2 or higher. The Qolsys Hardwire 16-F is one of the most versatile expansion modules we've ever seen.

Qolsys IQ Carbon: The Qolsys IQ Carbon transmits at 319.5 MHz and is compatible with the Qolsys IQ Panel 2 and Qolsys IQ Panel 2 Plus as well as older Interlogix/GE Simon panels. The Qolsys IQ Panel 2 and IQ Panel 2 Plus come in several different varieties, so be sure your panel supports 319.5 MHz wireless sensors before purchasing the Qolsys IQ Carbon. These panels customarily come in a box with a gold edge.

The IQ Carbon should be used in homes with a high chance of Carbon Monoxide gas build-up. CO gas is odorless and colorless, and is formed whenever carbon-based fuels are not burned efficiently. Carbon-based fuels include coal, oil, natural gas, and even wood. Homes with gas furnaces, gas appliances, fireplaces or portable gas heaters should definitely have properly placed Carbon Monoxide detectors.

Qolsys IQ Dimmer: The Qolsys IQ Dimmer is a Z-Wave plug-in on/off dim capable lamp module. It supports 120VAC/60 Hz and operates at 908.42 MHz, the Z-Wave frequency used in the United States. It can support the equivalent of 2.5A, 300W incandescent, 65W dimmable CFL/LED. If you plan to use this device for dimming, be sure that the bulb being used also supports light dimming. Although this is a standard Z-Wave device, rather than Z-Wave plus, it might be useful in a location where you need to add a device where you aren't concerned with range, and you know that the device won't need to act as a repeater. Although this device WILL repeat Z-Wave signals, it will do us using standard Z-Wave limitations.

Qolsys IQ Siren: The Qolsys IQ Siren uses standard Z-Wave technology, allowing a user to easily add a remote siren that produces up to 105dB siren sounds. This device plugs into any standard outlet. It is then paired with the alarm panel. On Qolsys panels, that's all you have to do. Once the siren is paired as a Z-Wave device, it will automatically follow the alarm sounds from the panel by default. The IQ Siren can also be used on other Z-Wave compatible panels, but may require additional programming in order to sound upon alarms on those panels.

Qolsys Image Sensor: The image sensor is a motion sensor with a still camera built-in. This affordable device just got even more affordable! For situations where you want to be able to see what's going on, but you don't want to add a full video system, the Qolsys Image Sensor is perfect. In conjunction with Alarm.com and the right monitoring plan, you can use the Image Sensor to peek-in and see what's going on at your home or business. You can set it up so that you receive an image capture upon the panel being disarmed, or when motion is detected in an area after a long period of inactivity. It's great for making sure the kids got home from school safely, or just to check in on your dog or cat who may be home alone.

We have learned from Alarm.com that some new features will soon be made available for the Alarm.com ADC-SWM150 Smart Water Valve and Meter. The new device features will be accessible on the latest version of the Alarm.com Mobile App for Android and iOS, Alarm.com Mobile App Version 4.19.2.

According to Alarm.com, iOS users "can select specific days to view their water usage and scroll back in the history to see how their usage has changed over time." The Alarm.com Mobile App will allow them to select specific days within the past thirty (30) days and view their water usage for the selected day(s). Users will also be able to review their usage history across the past 30 days. This is great for monitoring your water usage to make sure that you aren't being wasteful or letting your water conservation practices slip.

As for Android users, the new features seem to be a bit more limited, but the Android version of the app will still allow you to access an all-new "water usage graph" to check water usage across the last seven (7) days. All water-related activity will be found within the Alarm.com Mobile App Water Card, which is easily accessible from your Android or iOS device.

Keep in mind that the new Alarm.com ADC-SWM150 features may not be available just yet. They are being included with Alarm.com Mobile App Version 4.19.2. According to Alarm.com, the new ADC-SWM150 updates will be made available "in the coming weeks", so just keep your eyes open for these updates, and look forward to them coming soon! We know it's a bit early to get excited and eager, but we want you to hit the ground running once these features are available. Stay alert for the new Alarm.com Updates, and be ready once they are here!

If you aren't familiar with the Alarm.com ADC-SWM150, it is a Z-Wave Plus smart water valve that you can use to control the water supply for a location. It is great for turning the water OFF to prevent damage in the event of a serious flood or leak. Many users use these devices in conjunction with flood sensors, and they create smart scenes so that the water valve is CLOSED and the water is SHUT OFF automatically upon a flood sensor detecting a leak and alerting the security system. The unique aspect of the ADC-SWM150 is that it also includes a meter for monitoring and tracking your water usage over time. The ADC-SWM150 is fitted to water pipes of up to 1.25" (31.75mm) in size. It is typically installed by a plumber.

In addition, Alarm Grid recently began offering the Qolsys IQ Water Valve Kits that include both a water valve and a flood sensor. Unlike the ADC-SWM150, the Qolsys IQ Water Valve devices are a bit more DIY-friendly, as they are actually designed to be self-installed by end users, with no need to hire a plumber. However, a Qolsys IQ Water Valve Kit does not include any water meter for tracking water usage, like the one you receive with the ADC-SWM150. For users who decide upon the Qolsys IQ Water Valve Kits, they are available in two (2) distinct variants, those being the Qolsys IQWV908-KIT-PG (PowerG), and the Qolsys IQWV908-KIT-SL (319.5 MHz S-Line)

The Alarm.com ADC-SWM150 and the Qolsys IQ Water Valve Kits are available now on the Alarm Grid website. Do you have any thoughts or questions on these products? Leave a comment down below, and get the discussion flowing along - these are water valves after all! Our team is always interested in what you have to say about the newest security products and services. And of course, remember to keep checking the Alarm Grid Blog for more news and updates coming soon!

Alarm Grid is happy to announce that the Honeywell Home PROSIXRPTR Wireless Repeater is now available for purchase. The wireless repeater works with Honeywell Home and Resideo PROSIX Sensors and Honeywell SiX Sensors used with the ProSeries Security Panels, including the PROA7PLUS.

If you aren't familiar with wireless repeaters, these devices effectively double the range of compatible wireless sensors. This works by taking the wireless signal sent out from a wireless sensor and sending it out a second time, thereby effectively repeating the signal and doubling the sensor's range, assuming that the repeater module is placed strategically. The PROSIXRPTR is the first wireless repeater released from Resideo since the Honeywell 5800RP Wireless Repeater which is used to repeat the wireless signals of Honeywell 5800 Sensors. The new PROSIXRPTR is also the first-ever encrypted wireless repeater released by Resideo. Up to two (2) PROSIXRPTR devices can be used with a ProSeries System, with each repeater being placed in a different direction from a centralized ProSeries Panel.

There's a lot to take in with the PROSIXRPTR, so we'll do our best to cover everything here. The first thing we want to note is that the PROSIXRPTR is not a "plug-and-play" device, as you may be accustomed to with most wireless repeaters. In other words, the PROSIXRPTR will not begin repeating wireless signals until it is enrolled with a ProSeries Panel. These panels include the aforementioned PROA7PLUS, the Resideo PROA7PLUSC, the Resideo PROA7C, and the Honeywell Home PROA7. Any ProSeries Alarm System in need of a PROSIXRPTR Wireless Repeater must be on at least Firmware Version 3.591.92.0, which you can read about in greater detail here. The reason why the PROSIXRPTR needs to be enrolled with the alarm panel is because it is interacting with encrypted signals, and it needs to know sensitive network information to do its job successfully. Although you can have two (2) different PROSIXRPTR modules paired with a single ProSeries Panel, the two units will not communicate or "talk with" each other in anyway, and you cannot use a "series" setup to "triple" the range by having a sensor signal bounce off of one PROSIXRPTR to another PROSIXRPTR on its way to the panel. The PROSIX or SiX wireless signal will only be recognized by a single PROSIXRPTR, it will get repeated once, and will then end up at the ProSeries alarm panel.

There are other limitations affecting the PROSIXRPTR Repeater that should be discussed. While the unit can repeat SiX Sensors used with a ProSeries Alarm Panel on a high enough firmware version, the PROSIXRPTR cannot repeat the signals for SiX Series Sensors used on a Honeywell Lyric Security System. Remember, the PROSIXRPTR must enroll with the panel it is being used with. The unit has no way of integrating with the Lyric, and it cannot repeat wireless SiX Series signals used with that system. Unfortunately, Resideo never released a repeater for the Lyric and SiX Sensors, so that is just a limitation that Lyric users will have to live with, at least for now. The PROSIXRPTR also cannot repeat the signals of any legacy sensors that are being used with the Honeywell Home PROTAKEOVER Module. There are various legacy wireless repeaters available, so please reach out to us at support@alarmgrid.com during our usual 9am to 8pm ET M-F business hours if you need help figuring out which one to get for your alarm system.

One other thing we want to note with the PROSIXRPTR is that while it comes with its own transformer and backup battery, it does not come with any cabling for connecting the transformer. Make sure you have some around when you go to set it up. The unit supports a wire run of up to fifty (50) feet (~15.2 meters) when using 18 AWG cabling, and the maximum distance goes down if thinner cabling is used, so make sure to observe the permitted wire runs. Alarm Grid offers alarm wiring on its website if you need some. We even offer 10 ft., 15 ft., and 25 ft., pre-cut lengths of 22 gauge, 4-conductor wire. Or, you should be able to find some at your local hardware store. You can also use a Honeywell LT-Cable if you don't want to prepare your own wiring.

The PROSIXRPTR can be purchased on our website now! Please email us if you have any questions. Also, don't forget to leave a comment down below to share your thoughts on this new unit. We would love to hear what you have to say. And of course, keep paying close attention to the Alarm Grid Blog if you want to hear the latest security news, tips, and product releases. We'll be back soon, so stay posted!

If you are looking for an affordable and effective way to monitor your home and see what's going on while you are away, then image sensors might be worth exploring. When used in conjunction with security systems, image sensors offer great function and convenience, all for a low price.

The simplest way to describe an image sensor is as a motion detection sensor combined with a still-picture camera. Unlike security cameras that capture full-motion video footage, most image sensors will only produce non-moving images. These are some of the most interesting and unique devices that you can use with a home alarm system. While image sensors certainly aren't for everyone, many end-users take full advantage of these peripherals and what they have to offer. Overall, image sensors can go a long way towards rounding out your security system and helping you get the most out of it.

Perhaps the best way to use image sensors is as alarm verification devices. If you live in a jurisdiction where verified response is required, then using image sensors is often the only option you can use to verify an intrusion, short of upgrading to full video monitoring service. Depending on the image sensor and system you are using, you may be able to achieve a setup where captured image sensor pictures are sent to the central station for immediate review. A trained operator can review the images and use them as sufficient proof of a crime in progress and use that as grounds for requesting emergency dispatch. You should check your local alarm codes and ask your monitoring company if verified response is enforced in your area. .Alarm Grid monitored customers can email us at support@alarmgrid,com. We respond to emails during our regular business hours of 9 am to 8 pm ET M-F.

You might be wondering why image sensors aren't more popular than they already are. While image sensors sound excellent in theory, and they often meet those high expectations in practice as well, they are somewhat quirky devices that can present a unique set of challenges. That's also not to mention that some image sensors have notable limitations and restrictions in how they can be used. This shouldn't scare you away from using them, but you should understand that you may have to overcome some obstacles to achieve the setup you want. And also understand that some systems cannot support image sensors in any fashion.

One thing to consider with image sensors is that they are always two-way communication devices. You might call them bi-directional sensors. With image sensors, it's not as simple as the sensor sending a signal to the alarm panel. The panel also needs to send signals to the image sensor. For example, if an alarm is triggered on the system, then the system needs to be able to tell the image sensor that an alarm has occurred, and the image sensor needs to capture a photo of the scene. Then the image sensor needs to turn around and send the image to the panel so that it can ultimately be distributed to an interactive security notification platform, and potentially the central station, and the end-user. The bi-directional communication is also what makes it possible for an end-user to request image sensor photos in real-time, when supported. Because of this, many alarm panels cannot support image sensors unless a specific image sensor transceiver module is added to facilitate two-way communication. And for some panels, image sensor support isn't even possible, as no compatible image sensors and/or image sensor transceivers exist for the panel.

Now that we have talked about image sensors in general, let's start exploring some of the specific models. To make this a bit more simple, we will try and focus on different options available on a panel-by-panel basis. Just like with regular sensors, image sensor support depends on which panel is being used. We will start by addressing the fact that most of the Honeywell Alarm Panels don't support image sensors, though there is an exception. The Honeywell Lyric, the Honeywell LYNX Panels, and the Honeywell VISTA Panels all lack image sensor support.

Interestingly though, the Honeywell Home and Resideo ProSeries Panels - PROA7PLUS, PROA7PLUSC, PROA7, and PROA7C - all have a fairly unique image sensor option in the Honeywell Home PROINDMV. This is the only image sensor presented in this blog that can be set to capture full-motion video (10 fps) or still motion images (320x240). Captured video and images can be viewed at the panel under Panel Camera History, with the ten (10) newest captures being available for viewing. Captured footage is also sent to Total Connect 2.0 for remote viewing. At the time of this writing, the PROINDMV is the only image sensor available for use with TC2. This also makes it the only image sensor we offer that can be used with an IP-only monitoring plan. We're sure that Resideo is also working on a way to make captured video and photos visible to central station operators, but we haven't heard of such a feature being set up just yet. There is also a downside to the PROINDMV in that you cannot use it to request video and/or images. In other words, no peek-in function is available for the PROINDMV, at least not at this time.

Moving onto the Alarm.com Security Systems, pretty much all of the most popular systems have some image sensor option available. It seems that Alarm.com has really embraced this technology and made it possible for almost all users to start using image sensors. We will start with the PowerG Image Sensors, which are some of the most popular image sensors we offer. As PowerG already operates using two-way communication, PowerG Image Sensors do not require any special modules or add-ons for support. You just need a system that supports regular PowerG Sensors, such as a Qolsys IQ Panel 2 Plus or a DSC PowerSeries NEO with an added PowerG Transceiver. And even better if you have an IQ2+ you will be able to view captured images from the alarm panel, in addition to viewing them from Alarm.com. One limitation however is that these image sensors will only capture images when they specifically trigger alarms on the system. Alarms caused by other zones will not result in the PowerG Image Sensors producing photos. There are currently two (2) PowerG Image Sensors, those being the DSC PG9934P Indoor Image Sensor and the DSC PG9944 Outdoor Image Sensor.

All of the other image sensors used with Alarm.com Systems require some type of hardware add-on for the panel. Sticking with Qolsys, adding the Qolsys IQ Card-IS to the original IQ Panel 2 will make it possible to enroll the Qolsys QZ81030-840 Image Sensor with the system. Technically, you can also add the IQ Card-IS to a newer Qolsys IQ Panel 2 Plus, but doing so will require it to "steal" the internal antenna used by the PowerG Daughtercard. This will result in the system having virtually zero useful wireless range with Power Sensors. As a result, anyone with an IQ Panel 2 Plus is strongly discouraged from going the route of the IQ Card-IS and QZ81030-840 combo, and just get PowerG Image Sensors instead. But if you do have an original IQ2, then using a QZ81030-840 with an IQ Card-IS is a great option.

The 2GIG Alarm Panels also support image sensors, but only if an image sensor module add-on has been added to the system. Starting with the 2GIG GC2 and its successor, the 2GIG GC2e, both systems can support the 2GIG IMAGE1 Image Sensor after a 2GIG XCVR2-345 Image Sensor Module has been added and installed. Unfortunately, for 2GIG GC2e users, adding the 2GIG XCVR2-345 will take away the system's ability to support 2GIG eSeries Encrypted Sensors. We have heard rumors in the past that a 2GIG XCVR2e-345 Image Sensor Transceiver Module would be specifically manufactured for the 2GIG GC2e so that the system could support both image sensors and encrypted sensors simultaneously, but it's looking increasingly likely as of late that such a release may never see the light of day. Even then, the 2GIG IMAGE1 is an older device, and it isn't known for producing the most detailed images. Still, for alarm verification purposes, it usually gets the job done. Both the IMAGE1 and the XCVR2-345 are still available on our website.

Moving onto the 2GIG GC3 and 2GIG GC3e, both of these systems support the 2GIG XCVR3-GC3 Image Sensor Module, to allow 2GIG IMAGE2 and 2GIG IMAGE3 Image Sensors to be paired. Don't let the need for the XCVR3-GC3 scare you away. The module is extremely affordable and very easy to install. It just uses a 4-wire connection with the system board, and it hangs out the back of panel. Unlike the issues experienced with the GC2e, adding the 2GIG XCVR3-GC3 to a GC3e will NOT take away the panel's ability to support 2GIG eSeries Encrypted Sensors. Furthermore, the supported image sensor devices for the XCVR3-GC3 are newer, and they are known for producing clearer images than the earlier IMAGE1. The 2GIG IMAGE2 is still relatively basic with its 320x240 QVGA resolution. But the 2GIG IMAGE3 really shines with its 640x480 VGA resolution, thereby making it one of the best image sensors on the market. These image sensors can be set to automatically produce images during alarm events, and a user can even manually request images using the "peek-in" feature on Alarm.com. All things considered, image sensor support for the GC3 and GC3e is surprisingly robust, and in our opinion, quite underrated. These really are some of the best alarm systems available for image sensor support, and we think more GC3 and GC3e users should take advantage of images sensors and what they can bring to one of these systems.

Unfortunately, we have to end this post with the sad story of image sensor support on the 2GIG Edge. While the 2GIG Edge has made a huge splash in the security industry, representing one of the most exciting panel debuts we have seen of late, image sensor support for the system is basically non-existent. To elaborate, the 2GIG Edge supports the same image sensor module add-on as the GC3 and GC3e, that being the 2GIG XCVR3-GC3, and it remains very easy to install, using the same 4-wire connection as before, and just hanging out the back of the panel. Once added, you can pair the 2GIG IMAGE3 Image Sensor with the Edge, but the 2GIG IMAGE2 is unsupported. We're glad that 2GIG chose the "better" of the two image sensors to work with the Edge, but we're still a bit surprised that the IMAGE2 can't interface with the Edge and the XCVR3-GC3 combo. Fortunately, just like with the 2GIG GC3e, adding the 2GIG XCVR3-GC3 to the Edge will not eliminate the system's ability to support 2GIG eSeries Encrypted Sensors.

However, and this is a big deal, the 2GIG Edge with 2GIG XCVR3-GC3 will only see the 2GIG IMAGE3 as a standard motion detection sensor. In other words, the Edge cannot receive any of the captured images from the IMAGE3. And since the Edge can't get the captured images, it therefore cannot forward them to Alarm.com and/or the central station. This makes the 2GIG IMAGE3 nothing more than a fancy motion sensor for the Edge. It's super unfortunate, and one of the saddest things to learn about the 2GIG Edge. There is a ray of hope though. 2GIG has stated that this behavior between the Edge and IMAGE3 is not intentional, and they are working on a firmware fix to provide true image sensor support for the Edge in the future. No ETA for a fix is currently available, but we are hopeful that the 2GIG Edge will one day be able to carry on 2GIG's legacy of having some of the best image sensor support in the industry. For more information, we have a blog on the limitations of the 2GIG Edge in regards to image sensor support, which you can view here. And you can certainly expect Alarm Grid to provide an update once image sensor support for the 2GIG Edge has been fixed and made to work as intended.

We hope that this post has opened up your mind towards adding image sensors to your security system. They really are some useful and handy devices when set up properly. Users in verified response jurisdictions who aren't quite ready to make the jump to video cameras and the more expensive monitoring plans that come with them can often get started with image sensors at very little cost. And with a bit of testing and configuration, yours can truly be great and help you keep your home safe. If you have any thoughts or questions about image sensors, please leave them in a comment down below. We are eager for some fun and enthusiastic discussion about image sensors and what they can offer for home security. And don't forget to keep checking the Alarm Grid Blog, as we will have some more great topics to cover and discuss in the near future.

Alarm Grid is proud to offer a pair of new accessories for Honeywell Home PROSIXMINI2 Door and Window Sensors. We have 10-packs of replacement covers available in Brown (MINIBRNPK) and Black (MINIBLKPK), and 10-packs of replacement magnets, also in Brown (MINIMAGBRN) and Black (MINIMAGBLK).

If you aren't familiar with the Honeywell Home PROSIXMINI2, it is one of the leading door and window sensors for the Honeywell Home and Resideo ProSeries Alarm Panels. The sensor is known for its compact size of 2.9"L x 1.15"W x 0.75"D (73.66mm x 29.21mm x 19.05mm), its long-lasting battery life of at least 7 years, and its extended wireless range of more than 500 feet in an open-air environment. Like all PROSIX Series Sensors, the PROSIXMINI2 uses 128-bit AES encryption for advanced wireless security and protection.

Normally, the PROSIXMINI2 is only available in a White color option. Many users find this a bit disappointing, as the surface-mounted sensor will stick out very noticeably on darker brown or black doors and windows. With these replaceable covers and magnets, you can make a PROSIXMINI2 Sensor and its accompanying magnet Brown or Black in color. This can be very nice for achieving a more aesthetically pleasing installation. Just keep in mind that these replacement covers and magnets do not include any actual PROSIXMINI2 Sensors. These are just Brown and Black covers for existing PROSIXMINI2 devices and replacement magnets that can be used instead of the stock White magnets that are bundled with PROSIXMINI2 Door and Window Sensors.

Each replacement cover includes three (3) parts. These are the front cover for the sensor, the front cover of the magnet, and the back casing for the magnet. The back casing is basically the magnet's "backplate", as it is the portion that you mount to the door or window frame using either screws or some double-sided foam tape adhesive. All you have to do is remove the existing stock White front sensor, and replace it with the new Brown or Black cover. Then just do the same for the magnet's front cover and back casing.

Meanwhile, the replacement magnets are just like the original White stock magnets, only in a different color option. They can be split into three (3) components, those being the mounted backplate, the actual magnet inside, and the front cover that makes up most of the magnet's appearance. For best results, the magnet should be placed on the moving portion of the door or window, directly next to the main sensor on the door or window frame. When the door or window is opened, the magnet will separate from the sensor, thereby releasing the sensor's internal reed switch. This will cause the sensor to send a fault signal to the ProSeries Alarm Panel and trigger a system response. When installing, remember to observe the sensor's maximum magnet spacing gap of 1.15" (29.21mm) on non-metal surfaces. Please note that while the magnet is specifically designed for use with PROSIXMINI2 Sensors, it could really be used with any surface-mounted door and window sensor that is of a similar size. To see all the replacement magnets offered by Alarm Grid, please check out this page.

At this time, we are only offering 10-packs of the Brown and Black replacement covers, as well as 10-packs of the Brown and Black replacement magnets. We are not offering single PROSIXMINI2 Replacement Covers or single PROSIXMINI2 Replacement Magnets at this time. This may be something we would consider offering in the future, but for now, these accessories can only be purchased in quantities of ten (10). Additionally, we are also not offering Brown or Black variants of the PROSIXMINI2 Sensor at this time. If you want one of these sensors in a Brown or Black color option, the best solution we can currently offer is to get a PROSIXMINI2 in the regular White variant, and then get a 10-pack of replacement covers in the desired color. Of course, this will leave you with nine (9) extra sets of covers, so it may not be exactly ideal, but it is still a viable option nonetheless.

Do you think you will use these Brown and Black sensor covers and magnets in your home or business. And what do you think of the PROSIXMINI2 Sensor in general? Please share your thoughts in a comment down below. And don't forget to keep checking the Alarm Grid Blog for more security news, product updates, and helpful tips and tricks for getting the most out of your alarm system coming soon!

We have a short but sweet announcement to make today, as we now have the DSC PowerSeries NEO ICON Keypads available. These are the equivalent of Fixed English Keypads for the DSC PowerSeries NEO. They are great if you need additional keypads to accompany one or more Alphanumeric Keypads.

The following four (4) DSC ICON Keypads are now available for DSC PowerSeries NEO owners:

• DSC HS2ICN - Wired FE Keypad
• DSC HS2ICNP Wired FE Keypad w/ Proximity Tag Support
• DSC HS2ICNRF9 Wired FE Keypad w/ PowerG Support
• DSC HS2ICNRFP9 Wired FE Keypad w/ Proximity Tag & PowerG Support

The main thing to keep in mind with these ICON Keypads is that they are essentially Fixed English Keypads. This means that they do not display system status, and instead just display the current time. More importantly, they also cannot be used to program the panel, because they will not display zone settings.

In other words, you should only use one of these keypads as an extra keypad controller to accompany an existing Alphanumeric Keypad. You can use the Alpha Keypad a the primary controller and for making system changes. Then the new ICON Keypad can go in a secondary location, such as by your back door or in your master bedroom.

If you are looking for just one Alphanumeric Keypad, then a good option is the DSC HS2LCDRF9 N, as that keypad includes the built-in PowerG Transceiver so that you can begin adding wireless sensors. If you already have a standalone PowerG Transceiver, then you can get the Alpha Keypad without the built-in PowerG Transceiver, the DSC HS2LCD N Keypad or the DSC HS2LCDP N Keypad With Proximity Tag Support. Remember that we sell Proximity Tags for the DSC PowerSeries NEO here in a packs of eight (8).

What do you think of the DSC PowerSeries ICON Fixed English Keypads? Do you think you will add one to your DSC PowerSeries NEO Security System? Let us know in a comment down below. We would love to hear your thoughts. And stay tuned to the Alarm Grid Blog for more security news and product announcements coming soon!

We have a short but exciting announcement today, as new Qolsys IQ Smart Water Valve Kits are now available! There are two (2) kits available, including the Qolsys IQWV908-KIT-PG that uses PowerG communication and the Qolsys IQWV908-KIT-SL that uses 319.5 MHz S-Line communication.

Both of these new kits include two (2) components. The centerpiece is a smart water valve that uses Z-Wave Plus V2 700-Series communication technology. This piece of hardware has an adaptive torque output and can be self-installed on most quarter-turn (1/4 turn) ball valve pipes ranging from one-half inch (1/2") to one and a quarter inch (1-1/4"). Wireless communication is kept super secure using the optional Z-Wave S2 Security Protocol, which is supported by most 500-Series and 700-Series Z-Wave controllers.

Some of the best aspects of the Z-Wave 700-Series Qolsys IQ Smart Water Valve include its ability to be used indoors or outdoors (keep out of direct sunlight), it has an adaptive torque rating of up to eight (8) Nm, and its ingress protection rating of IP66, making it both waterproof and dustproof. The water valve is nice and compact at just 14.8mm x 9.6mm x 13.3mm in size, and it weighs a mere 603g. It can be used reliably in temperatures ranging from 14¡ãF to 121¡ãF. Best of all, it can be self-installed, without the need to hire a plumber.

The other component of the kit is a wireless flood sensor that is ideally used in conjunction with the smart water valve. Depending on the kit you choose, you will get either the DSC 915 MHz PowerG PG9985 Flood Sensor or the Qolsys 319.5 MHz S-Line QS5536-840 Flood Sensor. The PowerG option is good if you have any version of the Qolsys IQ Panel 2 Plus or a DSC PowerSeries NEO Panel with an added PowerG Transceiver. Meanwhile, the S-Line variant is good for the original non-Plus Qolsys IQ Panel 2 or even something like a wireless Interlogix Alarm Panel.

The biggest advantage to using the Z-Wave smart water valve and the wireless flood sensor together is that you can create an automated scene to turn the water off in an emergency situation. The way that this works is that when the flood sensor detects liquid, it will send a signal to the centralized alarm control panel. This faulted zone can then be programmed to trigger an automated smart scene that tells the Z-Wave valve to shut off the water supply. This can stop the flooding and potentially save you thousands of dollars in serious damage. If you've ever experienced the devastation of a major flood, then you will realize this importance.

Do you have any thoughts on this new smart water valve and flood sensor combination package from Qolsys? Share your viewpoint in a comment down below. We would love to hear what you have to say. It's great to see Qolsys taking such initiative in the field of flood damage prevention. Who knows, maybe Resideo and Honeywell Home or 2GIG and Nortek will release their own smart water valve in the near future (pure speculation). From what we can tell Qolsys really put out a winner here, and we're really excited to see it in action. Anyway, that's all the news for now. Keep posted to the Alarm Grid Blog for more updates in the security and smart home automation world coming real soon!

With ISC West 2021 quickly approaching, we thought it would be nice to take a quick look at various security manufacturers to speculate about what they might be presenting. Keep in mind, this is purely speculation. None of this is guaranteed, it's just our guess as what we might see.

Before you read about the various security and smart home automation offerings that we might see, make sure to check out our earlier post on the ISC West 2021 Health and Safety Guidelines, if you haven't already. Remember that this year's ISC West runs from Monday, July 19th through Wednesday, July 21st at the Sands Expo Center in Las Vegas, NV. With that out of the way, let's begin discussing some manufacturers.

Resideo

Resideo will certainly want to showcase its new system, the PROA7PLUS. We would expect to see both the Honeywell Home PROA7PLUS and the virtually identical Resideo PROA7PLUSC showcased prominently at ISC West 2021. You will also likely see its accompanying hardware, including the PROLTE-A and PROLTE-V Communicators, the PROTAKEOVER Legacy Receiver Module, and the PROSIX Series Encrypted Wireless Sensors. All of this aforementioned equipment is already available for purchase.

As for new products, we would be surprised if we didn't see Resideo releasing a new lineup of security cameras, perhaps under the Honeywell Home brand. With the Honeywell IPCAM-OC1 Outdoor Camera being discontinued, the selection of Total Connect 2.0 Cameras is pretty weak compared to the selection of Alarm.com Cameras. As such, a user getting security cameras as part of their system is more likely to choose an Alarm.com System than a Resideo System that is being used with Total Connect 2.0. We're sure Resideo wants to change that, so it would be disappointing if we don't see some new Resideo Cameras.

Lastly, we have heard rumors of a new hardwired system that would essentially replace the Honeywell VISTA Series. This lineup of wired panels is rumored to be named the Honeywell Home PROH8PLUS, and it would be a fully hybrid system able to support both hardwired sensors and wireless sensors, possibly using the PROTAKEOVER Module Legacy Receiver. While there's nothing inherently wrong with VISTA Alarm Panels, we might see Resideo updating their technology a bit, and bringing the hardwired selection lineup to the next level.

Nortek & 2GIG

From what we can tell, Nortek is very pleased with their 2GIG Edge Security System, and it's a fair bet that that 2GIG Edge Alarm Panel will be the main highlight of the 2GIG and Nortek Booth at ISC West 2021. And it's rightfully so, as the Edge is a highly advanced alarm panel with great features like facial recognition and Bluetooth disarming. What remains to be seen if Nortek will decide to roll-out a lineup of 2GIG Edge-exclusive encrypted sensors, perhaps to break away from the existing 2GIG eSeries Sensors that work with the Edge and the older GC2e and GC3e. However, we haven't actually heard anything about new 2GIG Edge Sensors, so that is just pure speculation. That being said, you can bet on 2GIG to heavily feature the 2GIG Edge Alarm System in their booth. If you haven't seen it an action yet, then ISC West 2021 figures to be a great opportunity. The 2GIG Edge and its accessories are currently available for purchase from Alarm Grid.

Qolsys

Qolsys has been secretly working away on some new alarm panels, and we figure ISC West 2021 to be right opportunity for Qolsys to unveil them to the public. The company needs to make a big splash to keep up with household names like Honeywell Home and 2GIG. We can expect to see the new Qolsys Budget Panel, the Qolsys IQ Hub, which we have been expecting for quite some time.

This may also be the chance for Qolsys to unveil their big new flagship alarm panel, the Qolsys IQ Panel 4. We are expecting the IQ Panel 4 to be a tremendous juggernaut in the home security industry, as the new alarm system will boast a Snapdragon Chipset running Android 9 Software, and come complete with an 8MP front-facing camera, all-new lifestyle automation pages, and oodles of great features. There's a chance Qolsys might be secretive and keep the IQ Panel 4 tucked away, but we would be pretty sad if we don't get to see it at ISC West 2021. We are hopeful that the Qolsys IQ Panel 4, Qolsys IQ Hub, and Qolsys IQ Router will be made available later this year.

DSC

Digital Security Controls (DSC) has been at the forefront of Canadian Home and Commercial Security for years. But now that both DSC and Qolsys are under the Johnson Controls banner, we may see considerably less of the DSC brand out in the limelight. As security systems are being made "sexier" and flashier to fit-in with a modern home, a bulky wired alarm system like the DSC PowerSeries NEO just isn't suitable for most residential applications. We don't expect DSC to be completely absent from ISC West 2021, but don't be surprised if Johnson Controls is putting Qolsys out on center stage, while DSC may remain more in the background as more of a commercial security option. The PowerSeries NEO and the existing DSC Iotega are both candidates to be featured in ISC West 2021. We have not yet received any word on possible "new" DSC equipment that may be featured.

Alarm.com

Alarm.com always has a prominent showing at ISC West, and we don't expect this year to be any different. However, we aren't really sure what to expect from Alarm.com, if anything new. It's possible that Alarm.com might try to make ISC West 2021 more of a quiet showing. It's likely that the Alarm.com Smart House will return, allowing users to interact with the latest smart home automation and video surveillance offerings from Alarm.com. The ADC platform strives to be a leader in terms of home automation, and they will likely use this ISC West to showcase their complete array of offerings and how their equipment can be used together to create a complete smart home. We are also regularly pleased with all the Alarm.com Video Camera offerings, so it's fair to expect their cameras to make an appearance. We aren't necessarily expecting any new cameras, but we definitely anticipate seeing great devices like the ADC-V523, ADC,V622-WELL, ADC-V723, and ADC-VDB770 Doorbell Camera.

Z-Wave Alliance

You can always bet on seeing the Z-Wave Alliance tucked away in the back corners of the ISC West Showroom Floor. Z-Wave wireless communication has secured itself as the leading protocol in smart home automation, and it continues to dominate for good reason. ISC West 2021, figures to be a huge opportunity for Z-Wave 700-Series Technology to really present itself to the public and showcase its rich capabilities. Z-Wave 700-Series, also being called Z-Wave Plus V2, promised extended wireless range, and a longer battery life of at least ten (10) years. Z-Wave Plus V2 sensors are also required to be built on the Z-Wave S2 Security Protocol, thereby making them more secure than most Z-Wave 500-Series devices.

Of course, the Alarm Grid team will be returning to ISC West 2021, ready to post about the latest security offerings from all the major brands. Be sure to keep-up with the Alarm Grid Blog if you can't make it to ISC West 2021 yourself. We will let you know the latest news for Resideo, Honeywell Home, 2GIG, Qolsys, and more as we attend the event in Las Vegas, NV. Stay tuned for more ISC West 2021, especially as we get closer to the even on July 19th through July 21st. We're super excited, so get ready for more content coming soon.

Alarm Grid is offering new Alarm.com System Enhancement Modules (SEMs) for Honeywell VISTA P-Series Alarm Panels. The ADC-SEM300-VT-AT (AT&T LTE & IP) and ADC-SEM300-VT-VZ (Verizon LTE & IP) are both available now. They provide reliable alarm monitoring and Z-Wave Plus capabilities.

If you aren't familiar with Alarm.com System Enhancement Modules (SEMs), they are basically cellular communicators that allow hardwired alarm panels to connect with the Alarm.com servers. The reason why SEMs for Honeywell VISTA Systems are so interesting is because normally these Honeywell-manufactured Alarm Panels are used in conjunction with the Resideo AlarmNet Servers and the Total Connect 2.0 Security Notification and Automation Platform. With an SEM, you can take control of your Honeywell VISTA Alarm Panel and instead have it communicate with the Alarm.com servers and the Alarm.com platform. Alarm Grid customers can choose from a variety of alarm monitoring plans to use with SEMs, including our Gold and Platinum Level Plans (Self & Full) and our Cellular-Only Plan. You can learn more about all our monitoring plans in this comprehensive blog post.

When you break-down what Alarm.com offers versus Total Connect 2.0, both platforms are remarkably similar. However, there are some cases where a user may prefer to go with Alarm.com over Total Connect 2.0. The biggest reason why we can think of is that the user wants to take advantage of the robust selection of Alarm.com Security Cameras. If you compare the selection of Alarm.com Cameras versus the Total Connect 2.0 Camera Selection, then it's clear that Alarm.com is (at least for now) the hands-down winner. Even if you aren't using security cameras in your setup, maybe you want a better integration with the Alarm.com Smart Water Valve, or maybe there's an Alarm.com Demand Response Program in your area that you want to take advantage of. In any case, if you have a VISTA P-Series Panel (e.g. VISTA-10P, VISTA-15P, VISTA-20P, VISTA-21iP, VISTA-21iPLTE), then an Alarm.com SEM will give you the option of using their services instead of AlarmNet and TC2.

When you compare the new "300-Series" SEMs with the previous VISTA SEMs, the ADC-SEM210-VT-AT and the ADC-SEM210-VT-VZ, the new ones have a couple of advantages. For one, the new 300-Series SEMs utilize much lower power consumption at just 230mA. The new modules also have the ability to be used without an external power supply, which was required with the older modules. In the setup without an external power supply, all of the power is supplied from the panel. However, you can still use an external power supply with the new SEMs if you do not have 230mA available from your panel. Also, the new 300-Series SEMs have new externally-facing LED status lights that are easier to read when needed.

Just like the prior editions, the new ADC-SEM300-VT-AT and ADC-SEM300-VT-VZ offer ultra-reliable connectivity across both an LTE cellular network and internet service using a wired ethernet connection. In addition, the new SEMs also return with Z-Wave Plus functionality, thereby allowing you to build a robust and complete smart home network around your security system. If you have been wanting to setup smart devices around your Honeywell VISTA Alarm System for use around the Alarm.com Security and Automation Platform, then these new SEM devices are perfect for the job at-hand. They are available right now and ready for use with Alarm Grid!

Do you have any thoughts about the new Alarm.com 300-Series SEMs, the ADC-SEM300-VT-AT and ADC-SEM300-VT-VZ? Would you consider switching over your Honeywell VISTA System to the Alarm.com Platform from Total Connect 2.0? Or maybe you're already happy with using your VISTA System with its current LTE cellular communicator? Let us know your thoughts in a comment down below. We would love to hear what you have to say. We always make sure to cover new product releases and the latest security system news, so make sure to stay tuned to the Alarm Grid Home Security Blog for more great content coming soon!